北京11选5走势图

咨询热线:

400-0733-598

深圳市创盈时代科技有限公司

联系人:汪菲菲

电话:0755-81779389

手机:18819037886

QQ:2764836233

Email:chytime@zmjhs.com

地址:深圳市宝安区沙井街道沙头工业区裕民路22号二楼西面

自动点胶机精度需要注意的设置技巧

发布时间:2019-03-11 15:28:30   来源:本文搜集于网络,由自动点胶机厂家创盈时代整理并发布,欢迎转载。    点击:

自动点胶机设备被广泛运用于各大领域,如半导体、电子元器件等。恰巧这些领域对自动点胶机的生产工艺要求很高,那么如何有效保障自动点胶机的点胶精度呢,一般来说需要从以下三个方面进行设置。
Automatic dispensing machine equipment is widely used in various major fields, such as semiconductors, electronic components and so on. As it happens, these areas of automatic dispensing machine production process requirements are very high, so how to effectively protect the dispensing accuracy of automatic dispensing machine, generally need to be set from the following three aspects.

点胶量大小和胶水粘度的设置,点胶量大小一般情况下应为产品间距的一半,这样既保障了组件有充足的胶水进行粘接,也不会有多余的胶水溢出,使自动点胶机点胶速度更快速、精准。胶水粘度大,胶点小,容易出现拉丝现象,胶水粘度小,胶点大,可能出现胶水渗染产品的现象,因此自动点胶机选择合适的胶水粘度很重要。
Dispensing size and glue viscosity settings, the size of the dispensing amount in general should be half of the product spacing, so not only to ensure that the components have sufficient glue for bonding, there will be no excess glue overflow, so that automatic dispensing machine dispensing speed faster and more accurate. Glue viscosity is large, small glue point, easy to appear drawing phenomenon, glue viscosity is small, glue point is large, may appear glue seepage dyeing products phenomenon, so automatic dispensing machine to choose the appropriate glue viscosity is very important.

自动点胶机

点胶针头和点胶压力的设置,自动点胶机针头的选择应根据产品大小和胶点的直径来选择,通常情况下,自动点胶机点胶针头大小应为胶点大小的一半,点胶机针头太大会造成胶水溢出,影响点胶精度。而点胶压力太大会造成胶水溢出现象,压力太小会出现漏点或者点胶断断续续的情况,因此达不到产品所要求的点胶工艺,使得产品合格率低下,工作效率低下。
Dispensing needle and dispensing pressure settings, automatic dispensing machine needle selection should be based on product size and the diameter of the glue point to choose, usually, automatic dispensing machine dispensing needle size should be half the size of the glue point, dispensing machine needle too General Assembly caused glue overflow, affecting the accuracy of dispensing。 and dispensing pressure too general cause glue overflow phenomenon, pressure too small will appear leakage point or dispensing intermittent situation, so can not meet the product requirements of the dispensing process, so that the product pass rate is low, low efficiency。

点胶机针头与工作面之间的间隔设置,不同的自动点胶机采用的点胶针头也是不同的,有些针头有一定的止动度,有些针头没有,因而把握好针头与工作面之间的点胶间隔很重要,每次在进行点胶工作之前应做好针头与工作面间隔的校准。
Dispensing machine needle and face between the interval settings, different automatic dispensing machine used dispensing needle is also different, some needles have a certain degree of stop, some needles do not, so grasp the needle and working face between the dispensing interval is very important, each time in the dispensing work should be done to calibrate the needle and face spacing.

深圳市创盈时代科技有限公司是一家专注于平台点胶机,落地式点胶机,视觉点胶机,非标自动化设备的研发生产和销售于一体的国家高新技术点胶机厂家。

本文关键字:点胶机精度设置

原文地址:http://www.zmjhs.com/news/djjs/1785.html

本文由www。chytime。com 深圳创盈时代科技有限公司 自动点胶机整理,欢迎转载,转载时请标明出处。

上一篇:点胶机在LED灯封装环节的应用
下一篇:解决点胶机胶水凝固的技巧有哪些?

北京11选5 五分pk拾 迅雷彩票注册 五分pk拾 北京11选5开奖结果 北京pk10稳赚 pk10冠军玩法 五分pk拾 五分pk拾 北京pk10论坛