北京11选5走势图

咨询热线:

400-0733-598

深圳市创盈时代科技有限公司

联系人:汪菲菲

电话:0755-81779389

手机:18819037886

QQ:2764836233

Email:chytime@zmjhs.com

地址:深圳市宝安区沙井街道沙头工业区裕民路22号二楼西面

解决点胶机胶水凝固的技巧有哪些?

发布时间:2019-03-18 16:14:29   来源:本文搜集于网络,由自动点胶机厂家创盈时代整理并发布,欢迎转载    点击:

凝固胶也被称为快干胶,如果在使用高精度自动点胶机点胶过程中,就容易出现凝固胶固化,那么凝固胶如何清除呢?其实凝固胶清除方式不止一种,接下来我们说一说具体的操作方法及注意事项。
Solidification Glue is also known as fast dry glue, if the use of high-precision automatic dispensing machine dispensing process, it is easy to appear solidification glue curing, then how to remove the solidification glue? In fact, the solidification glue removal method More than one, next we talk about the specific methods of operation and matters needing attention.

加热清除点胶针头的凝固胶
The solidification glue that heats and clears the dispensing needle

凝固胶与LED导电银胶的凝固速度比较快,使用凝固胶的蠕动式点胶机针头如果选用的不合适,容易使胶水在针头内出现凝固现象,从而堵塞胶水影响点胶精密度等。有些蠕动式点胶机中装有系统,当凝固胶凝固在点胶针头时可以启动加热系统,使针头内胶水融化,融化后的点胶针头可以进行一次清除,将残余的胶水清洗干净后可重新组装,进行点胶工作,避免凝固胶堵塞对点胶工作的影响,这是一种非常好的清除凝固胶的方法。
Solidification glue and LED conductive silver gel solidification speed is relatively fast, the use of solidification glue peristaltic Dispensing Machine needle If the selection is not suitable, easy to make glue in the needle solidification phenomenon, so that plugging glue to affect the precision of dispensing and so on. Some peristaltic dispensing machine is equipped with a system, when the solidification glue solidified in the dispensing needle can start the heating system, so that the glue melt inside the needle, melted dispensing needle can be removed once, the residual glue can be reassembled after cleaning, dispensing work, to avoid the effect of solidification glue blockage on the work of dispensing, This is a very good way to remove the solidification glue.

点胶机

不能够使用带杂质的胶水
Can not use glue with impurities

除了凝固胶胶水的性质,胶水在蠕动式点胶机针头堵塞内,如果使用胶水质量有问题,在使用过程凝固胶里的杂质容易堵塞点胶针头,从而使针头内的胶水慢慢出现凝固现象。在点胶过程中如果发现胶水的质量不好,停止点胶工作,将蠕动式点胶机清洗一遍后更换胶水,避免凝固胶的杂质堵塞影响出胶量等,所以尽量使用优质的凝固胶进行点胶。
In addition to the nature of solidification glue glue, glue in the peristaltic dispensing machine needle blockage, if the use of glue quality problems, in the use of the process of solidification glue impurities easy to clog the dispensing needle, so that the glue inside the needle slowly appear solidification phenomenon. In the dispensing process if found that the quality of glue is not good, stop dispensing work, the peristaltic dispensing machine after cleaning to replace the glue, to avoid the impurity blockage of solidification glue affect the amount of glue, so try to use high-quality solidification glue for dispensing.

深圳市创盈时代科技有限公司是一家专注于平台点胶机,落地式点胶机,视觉点胶机,非标自动化设备的研发生产和销售于一体的国家高新技术点胶机厂家。

本文关键字:点胶机 胶水凝固

原文地址:http://www.zmjhs.com/news/djjs/1786.html

本文由www.zmjhs.com 深圳创盈时代科技有限公司 自动点胶机整理,欢迎转载,转载时请标明出处。

上一篇:自动点胶机精度需要注意的设置技巧
下一篇:点胶机在点导热硅凝胶上的应用

北京11选5计划 北京11选5走势图 北京11选5开奖结果 PK10注册 北京11选5投注 五分pk拾 五分PK拾 pk10分析软件 pk10遗漏 北京pk10中奖规则